LowRider-3 Perfusion-Ready

LowRider for easy connection with any perfusion system

For perfusion systems not integrating a SUB CerCell offer the “LowRider” solution. Bottom outlet for easy connection to your pump used for circulation broth through the CFF/HFF. The LowRider-3 is designed to fit any 0.4 - 2 liter Working Volume (WV) perfusion system.

The LowRider-3 SUB, the unique broth outlet at bottom barb via a hose and a first aseptic connector. Retentate return to the SUB through a second aseptic connector on a hose and back into the LowRider-3 through the head plate and dip tube.

PR-SUB features for LowRider-3  

  • First class rigid mono component PolyCarbonate components
  • Vessel dimension: OD 137 x 270 mm gives in total 3,2 liter VV
  • Internal mixing design options (you can have any configuration):
    • A. Radial agitation Elephant ear impeller, OD 60 mm, 3 blades, 45 degrees, CW rotation down flow, 55 mm from the bottom = traditional design
    • B. Axial agitation Elephant ear impeller, OD 60 mm, 3 blades, 45 degrees, CW rotation down flow, 55 mm from the bottom and stator system = low RPM and reduced foam production

PR-SUB characteristics

  • 100% configurable design for the 3.2 liter Vessel Volume (VV) - Working Volume (WV) as low as 400 ml
  • Agitation from bottom by the Magnetic-Bottom-Drive (MBD) driven by the Magnetic-Stirrer-Table (MST)

PR-SUB - Thermal Control

  • Electrical blanket heating - wrap the orange silicone blanket around the SUB - traditional
  • Electrical jacket heating - Heating-Support-Foot integrated with the Magnetic-Stirrer-Table (MST-C) - the HSF adds important stability and ease in use - best choice

Needed or nice to have re-usable accessories

  • Re-Usable electrical Heating-Support-Foot to be bolted on the MST = very safe solution
  • Re-Usable elastic electrical heating blanket (dim 75 x 350 mm) = traditional setup
  • Magnetic-Stirrer-Table (MST-C) like the Compact model = any servo motor
  • SUB support plate for MST = use with electrical heating blanket
  • If needed - converter kit for servo motor
  • If needed - Sterile-Filter-Heater
  • Accessories to be found here - Accessory Products

From left: LowRider-3 in SS with Slot for the broth bottom exit. Center: For some PCS setup liquid thermal control is mandatory obtainable with Single-Use-Jacket (SUJ). At right: MST 42500-C mounted with the SSS suitable for any max 137 mm SUB and specifically designed for the LowRider-3. In case you prefer to use the heating blanket.