iSUB design seen from above

iSUB OD 110 mm description of head plate layout and 1,000 ml SUB details.

Description of head plate layout with impressive 5 big PG13.5 ports as seen on rendered picture. One of the 5 x PG13,5 is devoted to VisiWell or PolarWell. Centre photo include InCyte bio-mass SUS. To the most right including SUS – DO, pH, bio-mass not more available, GlucoCell, ConducCell.

In table below described standard setup as found under Commerce.

Port

Purpose

Description

Internal

External

1

Sample

ID 1.6 mm hose 15 mm from bottom

Long hose

1.6/4.8 x 100 mm silicone hose with swabable valve  

2

Thermo well

Non-invasive

Long tube

Max OD 6.4 mm thermo sensor

3

Harvest

ID 3 mm tube 5 mm from bottom

Long hose

3.2/6.4 x 600 mm C-Flex hose closed with Luer-Lok

4

Addition in headspace

 

10 mm barb

3.2/6.4 x 600 mm C-Flex hose closed with Luer-Lok

5

Addition in headspace

 

10 mm barb

1.6/4.8 x 600 mm silicone hose closed with Luer-Lok

6

Exhaust

Large diameter gas outlet

Nothing

5/8 x 150 mm Silicone hose with OD 50 mm sterile filter (16 cm2)

7

Aeration

Vertical glass micro sparger 15 µm pore

 

3/6 x 100 mm Silicone hose with a OD 25 sterile filter (5 cm2)

8

Addition in headspace

 

10 mm barb

1.6/4.8 x 600 mm silicone hose closed with Luer-Lok

9

Addition in headspace

 

10 mm barb

3.2/6.4 x 600 mm C-Flex hose closed with Luer-Lok

10

PG 13.5 port

Free for SUS

Nothing

PG 13.5 threaded port

11

PG 13.5 port

VisiWell

Nothing

Specific for 120 mm optical DO sensor

12

PG 13.5 port

Free for SUS

Nothing

PG 13.5 threaded port

13

PG 13.5 port

OneFerm

Nothing

pH with S8 connector / K8 with adaptor

14

PG 13.5 port

Free for SUS

Nothing

PG 13.,5 threaded port

 

For the exhaust filter at 16 cm2 surface area one of the Sterile-Filter-Heater (SFH) fits directly. CerCell supply a “sky-support” which carry the exhaust filter (incl SFH) and find support in a hole in the iSUB head plate or a corner of the MST.

Look under Commerce for prices and parts number