Re-Usable-Sensor (RUS) in Single-Use VisiWell
Hamilton manufacture the VisiFerm™ optical oxygen sensor with 0-300% saturated O2 range. We manufacture and install optionally (before bagging and E-beam irradiation) ) the unique non-invasive transparent Polycarbonate VisiWell integrating the optical active black spot.
The user inserts their own re-usable VisiFerm™ DO sensor (without stainless-steel end-cap and two O-rings) into the non-invasive VisiWell. Screw the VisiFerm into position gently by hand only. NO tools needed for less than 0.01 Nm torque. There is no contact between VisiFerm and the media. No autoclaving of VisiFerm is required ensuring the sensor obtain a long and stable lifetime.
Check out details from Hamilton here - www.hamiltoncompany.com/process-analytics/sensors/10077858
VisiFerm is available in PG 13.5 x 120, 220, 320, 420 size in both analogue and digital (ARC) versions. VisiWell in corresponding lengths selected to be pre-installed in various various SUBs, SUFs and SUMs.
Calibration according to Hamilton recommendations: www.hamiltoncompany.com/Sensors
- Insert VisiFerm in the VisiWell with no media in the SUB / SUF and calibrate traditional at 100% saturation.
- Fill media in the SUB / SUF.
Hamilton product information focusing on the VisiFerm DO sensor. Click on thumbnail and download.