When volume of media is as low as 100 ml in a mini SUB combined thermal control and mechanical support makes sense. The Heating-Support-Foot with the small CellVessel SUB may be mounted on most laboratory stirrer table or CerCell Magnetic-Stirrer-Table.
As stand-alone connected to thermal control unit Harmonia from sister www.cronus-pcs.com
Electrical thermal control of 500 ml SUB
Heating-Support-Foot (HSF) for CellVessel integrate electrical cartridge heating element. Choose 110 VAC or 230 VAC supply. Like for 110 volt for use in US. (always including ground and to be used with ground!) All HSF for 500 ml SUB/SUF is OD 137 mm. HSF-E integrates a thermal protection which cut of at 75°C and connect again at 50°C. NOT for cultivation purposes – only for your personal protection! Drilled holes are 4.2 mm for SS well for OD 2.0 mm thermocouple and 6.2 mm for OD 6.0 mm thermocouple.
Liquid thermal control of 500 ml SUB
Heating-Support-Foot (HSF-W) for CellVessel 500 ml based on circulating liquid from an external supply. G1/4" connections and possible Rectus-21 couplings. Hollow aluminium construction. Drilled holes are one 4.2 mm one 6.2 mm for thermocouple.
Mechanical support / thermal control of 500 ml SUB
The basic HSF (Heating-Support-Foot) (for your own electrical heating blanket) consisting of the aluminium ring shown here for the small CellVessel SUBs. Use the HSF for mechanical support, for thermal control with an electrical jacket of your own or our complete HSF. Drilled holes are: 4.2 mm and 6.2 mm for OD 6 mm thermocouple insert.