On-line and in-situ Glucose and Lactate
CITSens Bio sensors are based on screen printed electrodes which are coated with an immobilized enzyme. The sensing tip is built into the standard size PG 13,5 sensor body (120 mm and 225 mm) and installed in the CellVessel SUB.
|
Specifications |
|
|
Glucose |
Lactate |
|
Measuring range 0 - 30 mmol/L or 0 - 5.4 g/L Precision +/- 0.1 mmol/L Resolution 0.1 mmol/L |
Measuring range 0 - 15 mmol/L or 0 – 1.35 g/L Precision +/- 0.1 mmol/L Resolution 0.1 mmol/L |
- Glucose & Lactate may be combined in the same sensor body
- Dry storage at 20°C: 2 month
- Typical operation time: 3-4 weeks
SUS and transmitter connection
CellVessel with Glucose SUS
Stack Glucose SUS + transmitter
Latest photos 2021 of the SUS pre-installed in the 3.2 liter CellVessel. Photo of how CerCell receive the SUS from C-CIT dual bag packed not irradiated, kept cool. And the little blue WiFi transmitter.
CellVessel incl GlucoCell Probe
GlucoCell sensors from EuroStar project
C-CIT blue BioBeamner
The measured data are by the blue BioBeamer transmitted to the radio receiver ZOMOFI and transferred to a PC via LAN. Alternatively, various Process-Control-Systems suppliers integrate the C-CIT PCB transmitter for simplified adoption to the SUS. Further details available on www.c-cit.ch