iSUB design seen from above

iSUB OD 110 mm description of head plate layout and 1,000 ml SUB details.

iSUB head plate sketch

iSUB angled

iSUB SUS Loaded

Description of head plate layout with impressive 5 big PG13,5 port as seen on rendered picture. One of the 5 x PG13.5 is devoted to VisiWell. Kidney triple blade impeller driven by dual magnet hanging from the head plate. Rendered picture of the complete assembly.

In table below described standard setup as found under Commerce.

Port	Purpose	Description	Internal	External
1	Sample	ID 1.6 mm hose 15 mm from bottom	Long hose	1.6/4.8 x 100 mm silicone hose with swabable valve
2	Thermo well	Non-invasive	Long tube	Max OD 6.4 mm thermo sensor
3	Harvest	ID 3 mm tube 5 mm from bottom	Long hose	3.2/6.4 x 600 mm C-Flex hose closed with Luer-Lok
4	Addition in headspace		10 mm barb	3.2/6.4 x 600 mm C-Flex hose closed with Luer-Lok
5	Addition in headspace		10 mm barb	1.6/4.8 x 600 mm silicone hose closed with Luer-Lok
6	Exhaust	Large diameter gas outlet	Nothing	5/8 x 150 mm Silicone hose with OD 50 mm sterile filter (16 cm²)
7	Aeration	Vertical glass micro sparger 15 µm pore		3/6 x 100 mm Silicone hose with a OD 25 sterile filter (5 cm²)
8	Addition in headspace		10 mm barb	1.6/4.8 x 600 mm silicone hose closed with Luer-Lok
9	Addition in headspace		10 mm barb	3.2/6.4 x 600 mm C-Flex hose closed with Luer-Lok
10	PG 13.5 port	Free for SUS	Nothing	PG 13.5 threaded port
11	PG 13.5 port	VisiWell	Nothing	Specific for 120 mm optical DO sensor
12	PG 13.5 port	Free for SUS	Nothing	PG 13.5 threaded port
13	PG 13.5 port	OneFerm	Nothing	pH with S8 connector / K8 with adaptor
14	PG 13.5 port	Free for SUS	Nothing	PG 13.,5 threaded port

For the exhaust filter at 16 cm2 surface area one of the Sterile-Filter-Heater (SFH) fits directly. CerCell supply a “sky-support” which carry the exhaust filter (incl SFH) and find support in a hole in the iSUB head plate or a corner of the MST.

Look under Commerce for prices and parts number