PR-SUB (Perfusion-Ready-Single-Use-Bioreactor)
Complete your in-house assembled perfusion systems integrating the “LowRider” PR-SUB and save hood time. Bottom broth outlet for a Levitronix pump used for circulation the broth through the HFF. The LowRider-2 is designed to complete most 0.4 - 2 liter Working Volume perfusion system.
Left and middle photo – the LowRider-2 PR-SUB, the unique broth outlet at bottom via a hose and a first aseptic connector, retentate return to the SUB through a second aseptic connector on a hose and back into the LowRider-2. The right photo shows two different size Levitronix pumps (as to requirement) and one installed on the MST.
Features for the configurable LowRider-2 size PR-SUB
- First class rigid mono component PolyCarbonate components
- Any colour on head-plate (light blue is standard)
- Dimension: OD 137 x 270 mm CellVessel = 3.2 liter Vessel Volume
- Magnetic-Bottom-Drive (MBD) for impeller integrated with Aero magnet motor
A. Radial agitation Elephant ear impeller, OD 60 mm, 3 blades, 45 degrees, CW rotation down flow, 55 mm from the bottom = traditional design
B. Axial agitation Elephant ear impeller, OD 60 mm, 3 blades, 45 degrees, CW rotation down flow, 55 mm from the bottom and stator system = lower RPM and reduced foam production
Multiple head plate ports
- 1 x PG 13.5 port pre-installed with PolarWell or VisiWell for non-invasive DO RUS insert
- 1 x PG 13.5 port pre-installed with OneFerm pH Single-Use-Sensor with K9 connector
- 3 x free / extra sensor ports PG 13.5
- 1 x L-sparger macro or your preferred sparger
- 1 x dip tube for retentate return with 500 mm 10/14 hose + your preferred connector (AseptiQuick AQS17006 3/8")
- 6 x small inner diameter 900 mm long closed weldable hoses for various inlet and outlets on head plate
- 1 x bottom harvest with swabable valve on short hose
- 1 x exhaust with 2 x OD 60 mm sterile filters
Bottom side port = “Low-Rider” barb broth outlet + 200 mm long 9.5/14.3 hose + your preferred connector (AseptiQuick AQS 17006 3/8") or the Levitronix Single-use-Pump.
Seen from left a set of PR-SUBs and aseptic connectors. Center photo shows a beautiful low outlet in particular useful for Levitronix pumps. A set of Low-Rider-2 PR-SUBs ready for installment of Hollow-Fibre-Filter modules.
Needed or nice to have re-usable accessories:
- Re-Usable electrical heating jacket (pn 42966) to be bolted on the MST = very safe solution
- Re-Usable elastic electrical heating blanket (dim 75 x 350 mm) = traditional setup
- Magnetic-Stirrer-Table (MST) like the Compact model (p/n: 42500-C-8-x) = any servo motor
- SUB support plate for MST (p/n: 42521-15) = use with electrical heating blanket
- If needed - converter kit for servo motor (p/n: 42000 series)
- If needed - Sterile-Filter-Heater (p/n: 42900 series)
- Accessories to be found here - Accessory Products
LowRider-2 on MST for RE40 motor
Low-Rider on MST in foot
LowRider-2 close up Levitronix 200
The LowRider-2 mounted on the MST to be driven by any servo motor. Very stable and safe solution with no heavy servo motor on the low weight PR-SUB. Centre photo MST mounted with the black Kollmorgen motor used by many BioStat PCS. Left photo shows a great solution combining the LowRider-2 with the Levitronix pump.
Check out more under Support