4 - 10 liter LowRider incl Levitronix no HFF

PR-SUB (Perfusion-Ready-Single-Use-Bioreactor)

World only fully pre-assembled perfusion systems based on the “LowRider-10” PR-SUB. Eliminate hood and autoclaving time. Bottom broth outlet connected directly to the Levitronix Single-Use-Pump (SUP) for circulating the broth through your own Hollow-Fiber-Filter (HFF) and back to the PR-SUB. The LowRider-13-SUP is designed to fit any 4-10 liter Working Volume (WV) perfusion Process-Control-System (PCS). Broadly known as the TFF setup.

The LowRider-13-SUP PR-SUB, the unique broth outlet at bottom exit via hose directly connected to the Levitronix SUP. Simple connection to your own HFF and retentate return to the SUP and SUB via AseptiQuick on a hose to the head plate, dip tube and back into the LowRider-13 PR-SUB.

Features for the LowRider-13-SUP size PR-SUB

  1. Rigid mono component PolyCarbonate
  2. Vessel dimension: OD 200 x 445 mm (13 liter Vessel Volume)
  3. Multiple agitation, drive options:
    1. Head-Plate-Drive (HPD) for selectable servo motor drive
    2. Magnetic-Bottom-Drive (MBD) for selectable servo motor drive via MST
  4. Multiple impeller’s (and turbine’s) options, such as:
    1. Two elephant ear impeller, OD 100 mm, 3 blades, 45 degrees, CW rotation down flow, 55 mm from the bottom, 120 mm between

Head plate with 10 x PG 13.5 ports pre-installed with

  1. port with non-invasive PolarWell or VisiWell for DO RUS insert
  2. port with OneFerm pH Single-Use-Sensor with K9 connector
  3. Aeration port with 9 hole L-sparger or ring-sparger macro or your preferred sparger
  4. First inlet port for retentate return with 750 mm 9.5 mm hose from AseptiQuick
  5. Port for harvest via large diameter tube to bottom and external 1,000 mm hose
  6. Port for inoculation via tube 60 mm from bottom and external 1,000 mm hose
  7. In&Out 1 with 4 all small inner diameter 1,200 mm long weldable closed hoses
    1. 1 x inoculation inlet 30 mm from bottom
    2. 1 x media inlet 30 mm from bottom
    3. 1 x outlet sample 30 mm from bottom
    4. 1 x inlet for acid, NaOH 30 mm under cover
  8. In&Out 2 with 2 all small inner diameter
    1. 1 x bottom harvest hose with swabable valve
    2. 1 x acid inlet small inner diameter 1,200 mm long weldable hoses
    3. 1 x thermo couple well ID 7 mm
  9. exhaust to 500 ml foam collecting bottle, further 1,000 mm hose to 2 x 400 cm2 sterile filters

External to the LowRider-13-SUP find

  • Bottom broth barb outlet with 200 mm long ID9.5 x OD14.3 mm hose
  • PuraLev DCP200 SUP arranged with hose exit to the AseptiQuick connector
  • HFF of your choice supplied, prepared by you with AseptiQuick connectors in each end
  • Your prepared HFF with retentate outlet to be connected to AseptiQuick connector on hose and return to SUB

Check out more under Support

Accessories to be found here - Accessory Products