CellVessel 500 ml supporting accessories
When mass of media is as low as 100 mL in a mini SUB some mechanical support makes sense. Use the HSF for mechanical support, for heating control with an electrical Jacket of your own or with heating cartridge rod build-in the HSF. The HSF and small SUB may be mounted on most laboratory stirrer table or CerCell MST.
The basic HSF (Heating-Support-Foot) (no electrical heating or jacket included) consisting of the aluminum ring shown here for the small CellVessel SUBs. Drilled vertical well holes are 6,5 and 4,3 and 3,6 mm for thermocouples.
Heating-Support-Foot (HSF-E) for CellVessel including integrated electrical cartridge heating element. Choose 48 VDC or 110 VAC or 230 VAC supply and socket type. p/n like 2261-E-110 for use in US as the one shown on left photo. On photo right OD 137 mm HSF pn 2262-E-230 for 500 ml SUB/SUF. Equipped with 1,5 meter cable and the appropriate connector. (Always including ground and to be used with ground!) Integrate a thermal protection which cut of at 55°C and connect again at 35°C. NOT for cultivation purposes – only for your personal protection!
Drilled vertical well holes are 6,5 and 4,3 and 3,6 mm for thermocouples.
HSF CellVessel 500 ml pn #2262-W
HSF pn 2262-W for 500 ml CellVessel
HSF on MST standard
Heating-Support-Foot (HSF-W) for CellVessel 500 ml based on circulating liquid from an external supply. G1/4" connections and possible Rectus-21 couplings. Hollow aluminum construction. Drilled holes are one 4,2 mm one 6,2 mm for thermocouple (pn # 2262-W). Drilled vertical well holes are 6,5 and 4,3 and 3,6 mm for thermocouples.