BactoVessel description of head plate layout and other 3,2 liter SUF details
BactoVessel 3,2 turbine 25-3110
BactoVessel 3,2 standard 25-3110
BactoVessel std 25-3110
Rendered BactoVessel model 25-3110 OD 137 mm port layout, the 55 mm dual Rushton turbine for Head-Plate-Drive.
Description of top plate layout
|
Port No. |
Name |
Description |
Internal |
External |
|
1 |
Headspace addition line (weldable) |
ID 3 mm barb |
N/A |
ID 3,2 x OD 6,4 x 600 mm weldable hose with a Luer-Lok plug at the end (PIP230-6005) and green cable tie |
|
2 |
Harvest line |
ID 3 mm barb |
ID 3 x OD 6 mm silicone hose to the bottom |
ID 3,2 x OD 6,4 x 600 mm weldable hose with a Luer-Lok plug at the end (PIP230-6005) and red cable tie |
|
3 |
Addition below liquid |
ID 3 mm barb |
ID 3 x OD 6 mm silicone hose to 40 mm from the bottom |
ID 3 x OD 6 x 120 mm silicone hose, with female Luer-Lok connection (FTLL230-6005) and male plug and yellow cable tie |
|
4 |
Headspace addition line (weldable) |
ID 3 mm barb |
N/A |
ID 3,2 x OD 6,4 x 600 mm weldable hose with a Luer-Lok plug at the end (PIP230-6005) and green cable tie |
|
5 |
Sample line |
ID 3 mm barb |
ID 3 x OD 6 mm silicone hose to 40 mm from the bottom |
ID 3 x OD 6 x 120 mm silicone hose, with swabable valve and red cable tie |
|
6 |
Headspace addition line |
ID 3 mm barb |
N/A |
ID 3,2 x OD 6,4 x 600 mm weldable hose with a Luer-Lok plug at the end (PIP230-6005) and green cable tie |
|
7 |
Headspace addition line |
ID 3 mm barb |
N/A |
ID 3 x OD 6 x 120 mm silicone hose, with female Luer-Lok connection (FTLL230-6005) and male plug, clamp and yellow cable tie |
|
8 |
Headspace |
ID 3 mm barb |
N/A |
ID 3 x OD 6 x 120 mm silicone hose, with female Luer-Lok connection (FTLL230-6005) and male plug, clamp and yellow cable tie |
|
9 |
Headspace addition line (weldable) |
ID 3 mm barb |
N/A |
ID 3,2 x OD 6,4 x 600 mm weldable hose with a Luer-Lok plug at the end (PIP230-6005) and green cable tie |
|
10 |
Headspace addition line |
ID 3 mm barb |
N/A |
ID 3 x OD 6 x 120 mm silicone hose, with female Luer-Lok connection (FTLL230-6005) and male plug, clamp and yellow cable tie |
|
11 |
Headspace addition line (weldable) |
ID 3 mm barb |
N/A |
ID 3,2 x OD 6,4 x 600 mm weldable hose with a Luer-Lok plug at the end (PIP230-6005) and green cable tie |
|
12 |
Gas overlay |
ID 3 mm barb |
N/A |
ID 3 x OD 6 x 120 mm silicone hose, with female Luer-Lok connection (FTLL230-6005), clamp and OD 25 sterile filter and blue cable tie |
|
13 |
HPD connection |
PG 13,5 port |
Turbines x 2 |
N/A |
|
14 |
Sky support barb |
N/A |
N/A |
N/A |
|
15 |
Aeration |
ID 7 |
ID 7 x OD 10 mm PC tube Silicone elbow & sparger tip with 4 x ID 0,5 holes facing upward |
ID 8 x OD 12 x 100 mm silicone hose with OD 50 mm sterile filter (16cm2) |
|
16 |
Temp Well |
ID 7 mm |
ID 7 x OD 10 mm PC tube |
ID 8 x OD 12 Silicone hose to ensure sealing |
|
17 |
Large inlet |
ID 4 mm |
N/A |
ID 5 x OD 8 x 100 mm silicone hose, with female luer and male plug |
|
18 |
Dip tube |
ID 9 mm |
ID 9 x OD 12 mm dip tube to 25 (+-2) mm from the bottom |
ID 10 x OD 15 x 100 mm silicone hose with Female Colder MPC 3/8” connection (MPC17006T03), and male Colder plug |
|
19 |
Dip tube |
ID 9 mm |
ID 9 x OD 12 mm dip tube to 25 (+-2) mm from the bottom |
ID 10 x OD 15 x 100 mm silicone hose with Female Colder MPC 3/8” connection (MPC17006T03), and male Colder plug |
|
20 |
Exhaust |
PG 13,5 port |
N/A |
Single use gas cooler on OD15 x ID10 x 120 mm silicone hose, with dual OD65 sterile filter (26cm2) |
|
21 |
PG 13,5 port |
Sensor port |
maximum sensor length 225 mm |
Plug + O-ring |
|
22 |
PG 13,5 port |
Sensor port |
maximum sensor length 225 mm |
Plug + O-ring |
|
23 |
PG 13,5 port |
Sensor port |
maximum sensor length 225 mm |
Plug + O-ring |
|
24 |
PG 13,5 port |
Sensor port |
maximum sensor length 225 mm |
Plug + O-ring |
|
25 |
Ground port for SS rod |
ID 2,5 |
N/A (not installed) |
For banana-plug |
Baffles
- Three wall baffles of width 10 mm x thickness 4 mm
- Extend from head plate down to 0,5 L, 43 mm from the bottom
- Approximate clearance between SUB wall and baffle is 4.5 mm
Impeller
- Rushton turbine, OD55 mm, 6 blades
- 50 mm from the bottom, and 50 mm between turbines
Sensors
- Any of the many PG 13,5 ports can be fitted with a variety of sensors or accessories.