CellTumbler single systems
CellTumbler was originally designed as a replacement for expensive wave bag system. Fully avoiding any patent infringement. Main principle of CellTumbler is that the rocking joints are not rotating devices. CellTumbler support a range of different sized bags all based on the same drive unit and dual channel control unit.
# 50-13 - two identical sized GE 5/10 bags on individual platforms rocking mutually. Shown GE-2x5/10-dual tray. # 50-14 - system for two identical sized SS 5/10 bags on the same tray. This specific bag design is not interchangeable with any other bags. Shown SS 2x5/10 single tray.
# 50-15 - system for two identical sized GE 5/10 bags or one GE 10/20 liter bag on one tray. Shown GE - 2x5/10 single tray. # 50-16 - one 10/20 either GE or SS bag on one platform connected to the blue Drive+Heat+Unit. Shown SS or GE 10/20 bag. Photo to the rigth is a mixed platform CellTumbler.
Variations and comments
These Single System products are standard and many options may be supported. Please be aware of that:
- for 115 VAC supply - to be combined with a 230/115 VAC step down transformer
- Peristaltic pumps are not included
- Gas-Units must be added accordingly to your needs (check out next page)
- >1 bar (>15 psi) Air/CO2 gas pressure required (for air use like Alagonia-8 from www.cronus-pcs.com)