HighRider-2 ATF-2 perfusion ready

HighRider-2 for easy ATF-2 connection

The traditional ATF-2 perfusion system never became single-use and integrated with a SUB. CerCell offer the family of “CellRider” upstream ad-on solutions. The particular HighRider-2 is designed to fit widely used ATF-2 or even the new XCell-2 semi-ready perfusion system. The HighRider-2 integrates a dip tube for alternating broth from the SUB through the HFF to the ATF-2 diaphragm "pump" and back.

HighRider-2 include one dip tube for ATF-2 connection. Flow via the aseptic connector over the HFF to the ATF-2 SUE. The dip tube is connected via a 9,5 x 14,3 mm hose to the aseptic connector. Photo 1: Seen from left on the left side of the blue tip pH SUS the broth dip tube. Further seen the VisiWell SUW with the orange O-ring. Photo 3: Dip tube hose aseptic connector to the left.

HighRider-2 Perfusion-Ready-SUB - characteristics

  • Ready for connection to your prepared ATF-2/HFF setup – reduce hood requirement, speed up the prep work
  • Choose your colour on the SUB head plate ! (light blue, dark blue, orange, green, black, none)
  • Choose your preferred aseptic barb connector (pre-installed by CerCell)
  • All first-class rigid mono component PolyCarbonate

PR-SUB - features

  • 100% configurable design for the 3,2 liter Vessel Volume (VV)
  • Working Volume (WV) as low as 400 - 500 ml
  • Silicon hose from dip tube to aseptic connector is dim 9,5 x 14,3 mm suitable for use with the SonoTec clamp-on flow sensor.
  • Well proven agitation from bottom by the Magnetic-Bottom-Drive (MBD) Aero motor driven by the Magnetic-Stirrer-Table (MST) (pn 2250-C-8-x)

PR-SUB - Thermal Control - Plug & Play accessories

  • Electrical blanket heating - wrap the orange silicone blanket around the vessel - (dim 75 x 350 mm) ( pn 22370) - traditional
  • Electrical jacket heating - Heating-Support-Foot (HSF - pn: 2266-E) integrated with the Magnetic-Stirrer-Table (MST-C) - the HSF adds: important stability, head plate servo motor free, superior thermal control, and ease in use - best choice
  • Water control - Re-Usable-Jacket (RUJ) (pn 2282-225) for heating/cooling even combined with the Magnetic-Bottom-Drive (MST) 

Seen from left the HighRider-2 PR-SUB driven from inside the white support foot on the MST size standard by the black servo motor. HighRider-2 with "dark blue" head plate and one AseptiQuick connector on silicone hose from dip tube.

SUS - Single-Use-Sensor's part of the package

  • HighRider-2 features pre-installed VisiWell SUW for DO
  • HighRider-2 features pre-installed OneFerm pH SUS
  • Level/ground 
  • Also available with the short 25 mm Futura PICO bio-mass SUS mounted horizontal at the bottom of the 3,2 liter SUB (requires its own amplifier)
  • SUS combines with most PCS standard cabling 
  • HighRider-2 completely eliminates the need for components sterilised in conventional autoclave

Needed or nice to have re-usable accessories

  • Re-Usable electrical heating jacket (pn 2266-E) bolted onto the MST - the best
  • Re-Usable elastic electrical heating blanket (dim 75 x 350 mm) - the alternative
  • Re-Usable-Jacket (RUJ) for liquid born thermal control (pn 2282-225) to be bolted on the MST - yet an alternative
  • Magnetic-Stirrer-Table (MST-C) like the Compact model (p/n: 2250-C-8-B) - needed
  • SUB support plate for MST (p/n: 2259-137-15) - different models
  • If needed - converter kit for servo motor (p/n: 2252, p/n: 2253, p/n: 2254)
  • If needed - Sterile-Filter-Heater (p/n: 2211)
  • Accessories to be found here - Accessory Products