Perfusion ready 3,2 liter SUB

"Low-Rider" developed for perfusion

For perfusion systems not integrating a SUB CerCell offer the “Low-Rider” upstream solution. Bottom outlet for connecting pumps used for circulation broth through the CFF in cell retention setup. The "Low-Rider" allow the OEM manufacturer to generate a 100% pre-assembled kit.

Seen from left: rendered SolidWorks drawings of the “Low-Rider” SUB, the unique broth outlet at bottom via a hose and AseptiQuick-G, finishing retentate return to the SUB through a AseptiQuick size G on a short hose and back into the "Low-Rider".

Features for the "Low-Rider"SUB:

  • All first class rigid mono component PolyCarbonate
  • Magnetic-Bottom-Drive (MBD) with impeller on Aero magnet motor
  • Elephant ear impeller, OD 60 mm, 3 blades, 45 degrees, CW rotation down flow, 55 mm from the bottom
  • 1 x PG 13,5 port pre-installed with PolarWell or VisiWell for non-invasive DO RUS insert
  • 1 x PG 13,5 port pre-installed with polymeric pH Single-Use-Sensor with K9 connector
  • 3 x free / extra sensor ports PG 13,5
  • L-sparger macro
  • 1 x deep tube for retentate return with 0,1 meter 10/15 hose + AseptiQuick-G
  • 1 x “Low-Rider” broth outlet with barb + 0,6 meter hose + AseptiQuick-G
  • 12 small diameter long hoses for various inlet and outlets on head plate

Need to have re-usable accessories:

  • Re-Useable electrical heating blanket (75x350 mm for 230 or 110 VAC or 48 VDC)
  • Magnetic-Stirrer-Table (MST) like Compact pn: 2250-C-8-B
  • SUB support plate for MST (pn: 2259-137-15)
  • If needed - converter kit for servo motor (pn: 2252, pn: 2253, pn: 2254)
  • If needed - Sterile filter heater (pn: 2211)
Seen from left: “Low-Rider” SUB driven on the MST size Ultra-Compact, the “Low-Rider” further equipped with a Single-Use-Jacket for liquid thermal control, closer shot on SUJ details and the unique bottom outlet on the 3,2 liter “Low-Rider”.

If needed:

  • Three baffles 4x10 mm, extending from head plate down to 0,5 L, 43 mm from the bottom
  • Single-Use-Jacket (SUJ) for liquid thermal control with two G3/8” thread (10 mm barb or GL18 or Rectus)

How to do:

Order: sales@cercell.com
Check out “Low-Rider” price on Commerce
Check out “Low-Rider + SUJ” price on Commerce
Accessories to be found here: Standard Accessory Products